6X-1105D
19
3.1.5 Parapet Mount Installation. CohuHD p/n 8186-5
Use the adjustable head, wall mount, and parapet mount for installation to a parapet. See Figure 7 for a
typical installation diagram and Figures 14, 16, 17, and 20 for mount dimensions.
The parapet mount:
•
Installs on the inside of a parapet that is at least 18 inches (457.2 mm) high.
• Is rotatable 360° so the camera positioner system can be installed from the roof.
Wall Mount
Mounting Bracket
Bolt, 1/4-20 (4)
(supplied)
Bolt, (1)
(supplied)
Bolt, Hex Head 1/4-20x3/4”L, SS (3)
Washer, Spring Lock 1/4”, SS (3)
Washer, Flat 1/4”, SS (3 )
(supplied)
Adjustable Head
Support Strut
Clamp Swivel
Bolt, Hex Head, 1/4-18x1½”L, SS (3)
Washer, Flat 1/4”, SS (6)
Washer, Spring Lock 1/4”, SS (3)
Nut, Hex, 1/4”, SS (3)
(supplied)
Wall Swivel
Bolt, Hex Head, 5/16-18x1½”L, SS (4)
Washer, Flat 5/16”, SS (8)
Washer, Spring Lock 5/16”, SS (4)
Nut, Hex, 5/16”, SS (4)
(supplied)
The Wall Mount Flange connects
to the Parapet Flange (see below)
Figure 7. Installation to a Parapet
Flange
Upper Mounting
Bracket
U-Bolts
Lower Mounting
Bracket
Fasteners
Minimum 1/4” DIA
(not supplied)
Tube assembly
is rotatable 360
°
