matrIQ Optical Switch
|
matrIQ Switch
Coherent Solutions Ltd.
Version
1.03
15
The value in the 3
rd
octet of the IP address can be changed to any available value. It is
important to make sure that any other instruments connected to the computer do not share
this new IP address, as there will be an addressing conflict.
Clicking
APPLY
will write the new IP address to the instrument settings. Once set, the new IP
address will be displayed on the LCD screen on the back of the instrument.
7.2.2
Setting the Ethernet IP address
The default Ethernet IP addressing method is dynamic, as the DHCP will automatically assign
the instrument an IP address. This address can be found on the back of the instrument on the
LCD screen.
While connected over USB, typing in the assigned IP address in a supported web browser will
open the cohesionUI page for the instrument. Navigating to the Settings page, the Network
Interface configuration controls will be available.
The addressing method can be changed to a static method, where the matrIQ instrument will
always have the same IP address over Ethernet.
