Connect the I/O Module Cable
The I/O module’s I/O port supplies power to the 5000 series vision system, and provides access to the vision system’s
trigger and high-speed outputs.
CAUTION
:
All cable connectors are “keyed” to fit the connectors on the vision system; do not force the connections
or damage may occur.
1. Connect the I/O Module cable’s M12 connector to the vision system’s 24VDC connector.
2. Connect the I/O Module cable’s DB15 connector to the I/O module’s I/O connector.
3. Restore power to the I/O module’s 24VDC power supply and turn it on if necessary.
4. Use In-Sight Explorer software to configure the vision system and I/O module. For more information, refer to the
In-Sight
®
Explorer Help
file, which is available from the Help menu or by pressing the F1 key.
22
Installation
