Cognex In-Sight 1721, User Manual

Page: 74 / 156

Section 7: Native Mode Commands In-Sight
®
1700 Series Wafer Reader
64
EVALUATE EXTENDED NATIVE MODE COMMANDS (GET AND SET)
EV GetWaferFixTheta The orientation of the fixture.
EV GetWaferNumFailed The number of failed reads for all Configs.
EV GetWaferNumPassed The number of passed reads for all Configs.
EV GetWaferOrder
EV SetWaferOrder The index of the Read Order setting.
EV GetWaferScoreAs100
EV SetWaferScoreAs100 The scoring method for character positions fielded as dashes (-), dots (.) and spaces.
EV GetWaferSummary A summary of the results for the most recent read.
EV GetWaferTimeout
EV SetWaferTimeout The total amount of time (in seconds) to allow for a read.
For more information on these commands, refer to the In Sight
®
Guide & Reference
HTML Help file, included in the installation package.
7.1 Basic Native Mode Commands
The following Native Mode commands are used to remotely control a wafer reader from
user-designed software. Each command returns a Status Code, the number of characters
(in bytes, including Carriage Returns and Line Feeds) in the output that follows, and the
results.
7.1.1 Abort Execution
AE[2]
Terminates the current execution of the WafID function within the spreadsheet. Unlike
most Native Mode commands, no status code is returned after the Abort Execution
command is executed, but depending on the function that is terminated, other information
may be returned.
Input : 2
Sample Input and Output
NOTE In this sample, Abort Execution causes the current read operation to terminate.
AE2
SM"READ"0
1
AE2
[UH587IX1CGC3,390.000,1.000]