Precautions
Reduce the risk of injury or equipment damage by observing the following
precautions when installing Cognex products:
l
Route all cables and wires away from high current or high-voltage power
sources to reduce the risk of damage or malfunction due to over-voltage,
line noise, electrostatic discharge (ESD), power surges, or other
irregularities in the power supply.
l
Do not install Cognex products where they are exposed to environmental
hazards such as excessive heat, dust, moisture, humidity, impact, vibration,
corrosive substances, flammable substances, or static electricity.
l
Changes or modifications not expressly approved by the party responsible
for regulatory compliance could void the user’s authority to operate the
equipment.
l
Include service loops with all cable connections.
l
Ensure that the cable bend radius begins at least six inches from the
connector. Cable shielding can be degraded or cables can be damaged or
wear out faster if a service loop or bend radius is tighter than 10X the cable
diameter.
l
This device is certified for office use only and if used at home, there can be
frequency interference problems.
l
Use this device in accordance with the instructions in this documentation.
l
All specifications are for reference purposes only and can change without
notice.
2
