Note
: Power on the RS-232 cable can be supplied by either the DC Power Plug or Pin 1 of the D-SUB.
DO NOT
use
both in parallel.
Connecting a DataMan 8072 through USB
1. Connect the serial slide-in (DMCM-SERIALM-00) to your DataMan 8072.
2. With a 2.5 mm Allen wrench, tighten the screws so that the slide-in is firmly locked.
3. Insert the plug, slide the cable lock up to the reader and twist the cable lock in place.
Use the DM8500-USB-00 cable (2.5 meters) or the DM8500-USBC-02 cable (2.5 meters).
Note
: Disconnect the DataMan 8072 reader from power before inserting/removing the communication modules.
17
Connection Options
