7500 Series Verifier Kit Contents
DataMan™ Verifier Calibration Card
CALIBRATION
TARGET
Instructions:
1. Center calibration
target in the field
of view
2. Depress and hold
reader trigger until
calibration routine
is complete
Lot Number
20061102
COGNEX
7500 verifier stand-off
Calibration card
(stored in protective sleeve)
This document
Data Matrix Symbol Quality Verification
Cognex DataMan 7500 Series handheld verifiers ensure that a Data Matrix
symbol meets the AIM DPM (Direct Part Mark) Quality Guideline.
The DataMan 7500 Series handheld verifiers provide:
Contract Compliance: The DataMan 7500 Series software, integrated
lighting, and fixed optics meet the AIM DPM Quality Guideline.
System Calibration: The DataMan 7500 Series verifier includes a certi-
fied calibration card necessary to calibrate the reader.
•
•
If you are upgrading an existing DataMan 7500 series reader to use as a
verifier, your reader must be using firmware version 2.1.1 at a mini-
mum. To update the firmware:
Connect your reader to the DataMan Setup Tool.
Choose
System->Update Firmware
.
Select the file
DM7xx0_v2.._rc.bin.gz
from the directory
Cognex\DataMan\Firmware\DM7500 Series
.
To enable the DPMV feature, you must upload a feature key file to the
reader:
Connect the reader to the DataMan Setup Tool.
Choose
System->Upload Feature Key
Select the feature key file that you receive from Cognex.
Disconnect the reader from the DataMan Setup Tool.
Perform a soft reset of the reader by scanning the
Soft reset
symbol
on the back of the 7500 Series ID Reader Quick Reference.
1.
2.
3.
1.
2.
3.
4.
5.
Refer to your 7500 Series ID Reader Quick Reference for information on initial
setup and establishing communication with the reader itself.
