15
AETERNA CHANGE-GIVER COIN MECHANISM REL. 2.7
®
sensing the quantity of coins present inside the 5 tubes and the sensors for controlling the cam
positions. The connector of the board for lower photocells (indicated in position 1) is connected by
means of the special harness to the J10 connector of the Coin Mechanism Base board.
1.3.8. Technical data label
During the testing phase on the side of the Coin Mechanism
is placed a label with the data concerning the model
programmed in the Coin Mechanism.
The label reports the following data:
•
product name;
•
product code;
•
name of the programmed model;
•
programmed values (V);
•
output/addressing (O = OUT);
•
programmed channels (C).
fig. 12
In the first column on the left are indicated the values of the coins programmed in the model; in
the second column the addressing and the position of the tubes:
0
(zero) = Reject,
1-5
position
inside the Tube group,
C
= Cash; in the third column the programming channel used for the coin
storage in the model.
1.4. Accessories available on request
1.4.1. Interface for electromechanical Automatic Vending Machine
To apply the Aeterna Change-Giver Coin
Mechanism to an Electromechanical automatic
vending machine (24V/110V/230V) it is
necessary to request any authorised Coges
dealer for the suitable interface corresponding
to the particular vending machine model.
Together with the interface is supplied the
connecting harness.
fig. 13
AETERNA EXE
EUR (0.05/0.10/0.20/0.50/0.05)
952000 V=24V AC - Pmax=30W
1.01 CE
V O C
V O C
EUR 0.01
EUR 0.02
EUR 0.05
EUR 0.10
EUR 0.20
EUR 0.50
EUR 1.00
EUR 2.00
0
0
1/5
2
3
4
C
C
1
2
3
4
5
6
7
8
