16.
12. Programming. Adjustments. – SERVICE
Tea Cater
ADJUSTING WATER QUANTITY
1. Push the
full brew and Stop/Pause
buttons
simultaneously
and hold for 5 seconds, until
you hear 3 beeps.
The display shows
the current setting.
2.
Adjust using the buttons:
full brew
= (increase outlet valve activity)
and
half brew
= (decrease outlet valve activity)
3.
Confirm the new settings
by pressing the
Stop/Pause button.
Adjust
Signal
Off 6
25%
5
20%
4
15%
3
10%
2
5%
1
0% 0
-5%
-1
-10%
-2
-15%
-3
-20%
-4
-25%
-5
Adjusting quantity of water.
This is to improve the water flow into filter holder.
The flow of PDS valve is set to 0.95 litre /minute. Depending on the coarseness and
amount of coffee that’s used when brewing, the flow might need adjustments to prevent
overflow in the filter holder.
Adjusting quantity of water
1.
Check the water flow.
This should be 0,95L/minute.
Adjust PDS valve if necessary. See fig.1.
Shall been done by an authorized
installation engineer.
