12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
17
.
Technical data
Electrical connection
230 V/50 Hz/ 2,5 A
Water connection
3,0 m Tube with 3/8" internal thread
(minimum 2,5kg water pressure.)
Compressor
Elektrolux GL 80
Cooling gas
HFC-134a Amount to fill 200 gram
Cooling capacity
356 W
Cooling system
Aluminium cold block with stainless-steel pipes inside.
Front light
18 W Fluorescent-tube
Front sign size
300*471mm.
Dispenser measurement
Height: 800mm With: 295mm Depth: 550mm
Weight
51 Kg
Note 1.
The thermostat is factory adjusted and improper adjustment
may cause the cooling system to freeze causing damage or
water leakage in the dispenser.
Note 2.
Frequent opening and closing of the doormay cause
ice build-up on the cooling plate inside the cabinet which
decreases the efficiency. If this happens, defrost the machine
until all ice has melted.
Note 3.
It is strongly recommended to use some sort of water isolator
in the water line in case of an emergency leakage.
Note 4.
Maximum ambient temperature in the room where the dispenser
is located should not exceed more then 25 C.
Note 5.
If the dispenser has frozen, check water tubs and connections
inside the dispenser before running the dispenser again.
Notes