12
.
Cleaning every day. Disassemble blender system.
6. CLEANING:
Cleaning every day.
5.
Wash disassembled parts
and ensure that they are completely dry before
refi tting them and before the mash machine is used again.
Blender cup - Condensation trap - Whisk - Whisk housing - Fitting plate
1. Begin by loosening
the condensation trap and the
blender cup following image
steps 1, 2, 3
2. Loosen the whisk housing
following image steps 4 and
5.
3. Loosen the wish, pull
straight out D.
4. Loosen the fi tting plate, turn
clockwise following image C.
Reassemble the blender system.
6. Reassemble the blender system in the reverse order.
IMPORTANT! When refi tting the wish, the plane side A of the whisk motor shaft must correspond
with marking B on the whisk.
Wash these parts and refi t them.
Concentrate
container
Concentrator
Holder
for
mash
scoop
mash
scoop
Drip
tray
Note: The container for the potato mash powder must be washed in warm water using detergent
once a week.
