1.
Turn the key slowly ninety degress and back again.
2.
Push button for drink 1 for 6 seconds.
After 4 seconds the signal will go faster.
3.
After 6 seconds
The display shows;
”Open door”
”load detergent”.
4.
Fill 25gr detergent (A) (one portion bag) into the brew
mechanism (B). (Detergent will be supplied from your
retail dealer)
The display shows;
”Close door”
The display shows;
” When ready press key”
Place a jug into the drip tray.
5.
Push button for drink 1
The display shows;
”Cleaning mixer”
(2....)
The display shows:
”Rinsing coffee” ”Soak time:”
The machine start to count down from 300 seconds.
The display shows.
”Brewer cycle” the machine is counting down.
11
.
Automatic cleaning of brew mechanism, mixing bowl:
Should be done every week.
The brewmechanism can easily be cleaned with the key switch in ”cup” (normal) position.
6. Cleaning program
CLEANING
Future
6.
Push ”+” button in 6 seconds
The display shows:
”Change paper/Rotate” ”Push E/ +”
7.
Push button for drink
2.
The display shows;
”Preparing paperload”.
8.
The machine will rotate in position.
The display shows
,”Change paper”
9.
Open door
,
dismantle
, clean and reassemble brew house.
page 12.
10.
Close door.
11.
Machine is ready to use again.
12.
Take out a cup of coffee and waste it, just to make sure
that there is nothing left of detergent.
IMPORTANT!
Dismantling and cleaning/washing brew house:
After the automatic cleaning program is finished. Clean brew house! This must be done, to make sure
that you will remove residual detergents and coffee remains!
Do as follow in paragraph 10- 19. (See
fig. 1,2,3,4 page12).
If machine not will go
back in start position.
Restart machine.
B
1.
5.
6.
7.
2.
To stop cleaning process: push ”Stop” button.The brew mechanism will go back to start position.
NOTE! Dont stop the process when detergent has been loaded. Then the cleaning must be finished.
A
Summary of Contents for CQ Future Combi automat
Page 22: ...13 DIMENSION SKETCH Future 22 ...
Page 23: ...14 Circuit diagram 23 ...