COFAN 0900 0801, Instruction Manual

Page: 12 / 24

10
ENGLISH
19. Storage
The saw must be lubricated before storing. Following the air motor lubrication instructions with an exception to
step 4. Only run the saw for 2 to 3 seconds instead of 20 to 30 seconds because more oil needs to remain in
the saw when storing.
2. Particular Safety Instruction
1. Information of Noise Level
(1) The noise level at the operator’s position is about:
Sound Pressure Level: 90.6~93.0 dB (A).
Sound Power Level:
103.4~ 105.7 dB (A).
(2) Reference standard: ISO 3746 .
(3) Always wear ear protectors during operation.
2. Information of Vibration Level
(1) The vibration level at the handle is about:
3.610~ 6.172 m/s 2
.
(2) Reference standard: EN 28662-1 .
3. Information of Temperatures
(1) The temperatures at the handle (8 hours/operation) is 30 ºC .
4. Information of product
(1) Rated no-load speed of spindle is 1800~3500 rpm .
5. Warnings
(1) The power tools are not generally insulated for coming into contact with electric power sources.
(2) The power tools shall not be used in explosive atmospheres unless specially designed for that purpose
(3) Not use blades which are cracked of deformed.
(4) Ensure that the blade is properly clamped.
(5) Not stop rotation of the disc by a lateral pressure on it.
(6) Moveable guard must not be locked in the open position.
(7) Pay attention to the risk of drawing in or trapping of long hair, loose clothing.
(8) Make sure that the guard for the rotary saw blade, if mounted on the saw, is in place and is correctly
mounted and functions properly.
(9) Make sure that sparks if emitted are directed so as not to cause a hazard.
(10) Pay attention to the risk of a whipping compressed air hose.
(11) Rest after continuous operation.
6. Instructions
(1) To disconnect power tools from the energy source before changing blades or making adjustments.
(2) To release the start and stop device in the case of an interruption of the energy supply.
(3) To rest the guide plate fully on the work piece.
(4) To use only lubricants recommended by the manufacturer.
7. Explanations of warning signs used for this tool:
The operator’s instruction must be
read before work starts
Hearing protection
must be worn
Eye protection must be used or
safety glasses worn