14
English
ATTENTION!!
Ensure that all data conductors are isolated from one another, the screening and the metal housing of the connector.
Pin number 1 and the housing should never be connected to mains power.
Stage Lite Led
can operate in two modes:
1.
using DMX512 control signal
2.
automated “STAND ALONE” or “MASTER/SLAVE” modes” (see chapter
8.2. MODE function
)
6.1. Connecting DMX signal
Control signal is digital and is transmitted via two pair screened cable, as recommended in international standards for the transmission
of DMX512. Connection is serial, utilising the XLR3 and XLR5 sockets located on the rear panel of the
Stage Lite Led.
Signal connection via the XLR3 and XLR5 connectors
Connection is to international standards. Connection is as indicated below:
pin 1 = GND
pin 2 = data -
pin 3 = data +
Should your DMX 512 controller output signal via a cannon XLR5 (5 pin), pins 4 and 5 should remain unconnected.
6. DMX signal functions
Connect to other Stage Lite Led
Altri Stage Lite Led