Coemar ReLite Led HD Manual Download Page 5

Italiano

5

3. 

The level of technology of 

ReLite Led HD

 requires the use of specialized personnel for all 

service applications; refer all work to your authorised 

Coemar

 service centre.

4. 

A good earth connection is essential for the proper functioning of the projector. Never 

connect the fixture if there is no earth connection.

5. 

Main cables must not come into contact with other cables.

6. 

Do not operate the projector with wet hands or in an area where water is present.

7. 

The fixture must never be located in an exposed position, or in areas of extreme humidity.

Safety:

1. 

The external surfaces of the unit, at various points, may reach 60°C. Do not handle the 

device for at least 10 minutes after the LED turning off.

2. 

Never install the fixture in an enclosed area lacking sufficient air flow; the room tempera-

ture must not exceed 45°C.

3. 

The projector contains electronic and electrical components which must under no circum-

stances be in contact with water, oil or any other liquid. Failure to do so will compromise the 

proper functioning of the projector.

2.2 

Warranty conditions

1. 

The fixture is under warranty for 24 months from the purchase date against factory defections.

2. 

Damage ought to unskillfulness, inappropriate use, or lack of suggested maintenance are excluded from the 

warranty.

3. 

Warranty expires when the projector is opened by unauthorized personnel.

4. 

Warranty doesn’t include the replacement of the fixture.

5. 

Serial number and model of the fixture are necessary to retrieve informations and assistance from the 

dealer.

2.3 

EC norms

The projector meets all fundamental applicable EC requirements.

Summary of Contents for ReLite Led HD

















Reviews: