Coemar ReLite Led HD, Manual, Page: 10 / 16

Italiano
10
5
. Powering up
5.1
Operating voltage and frequency
The unit may operates at voltages ranges from 100 to 240 V at a frequency of 50 or 60 Hz. It is not necessary
to change any default settings:
ReLite Led HD
will automatically adjust its operation to adapt to any frequency
or voltage within this range and will be dimmable from traditional TRIAC AC or IGBT dimmers.
Warning!!
The use of a thermal/magnetic circuit breaker is recommended. Strict adherence to regulatory norms is
strongly recommended.
Ensure that the main characteristics are within the recommended range for the use of ReLite Led HD .
All connections should be carried out by a suitably qualified personnel.
6
. Turning the ReLite HD on
After having followed the previous steps, turn on the projector, in which the ReLite Led HD is installed, connecting
it to the mains power.
The ReLite Led HD has two dip-switches mounted on board ( A ):
1. The first dip-switch allows the adjustment of the fan speed. Usually the fan works at maximum speed, if set to
ON the fan will be set to the 75% of its speed.
2. The second dip-switch allows the reset of the temperature. Raise and lower the dip-switch 4 times within the
first 5 seconds of ignition.
7.
Dip-switches
A
1 2
ON
Warning!!
In both cases, the projector needs to be powered during the procedure.