If the DMX 512 fixture to be controlled from the
manual system 6
has an XLR3 connector, simply do not connect pins 4
and 5, which are internationally recognised as not in use for DMX 512 signal connection.
The following diagram shows DMX 512 connection between a
manual system 6
and a
coemar comet
.
All DMX 512 controllable fixtures and dimmers must be set to the correct DMX address in order to operate correctly from the
manual system 6.
Section 5 describes the procedure necessary for correct setting of the fixture to be controlled from the
manual system 6.
in
in
out
out
5 pin XLR 5/M
3 pin XLR 3/F
3
2
1
to other
comet
dmx 512
standard
out