Kit CO9136 – Infinity Wash XL
Package contents:
-1 Cod. LE1507/1L PC lens
-1 Cod. 260.318ASM mounting ring
-3 self-locking nut
Needed tools:
-Star screwdriver
-Flat screwdriver
-n°7 wrench
This kits contains all the material needed to mount a PC lens on
Infinity Wash XL
instead of default Fresnel lens
and to change beam characteristics. We recommend to read and follow carefully these instructions in order to
complete the operation without effort .
Warning !
The following instruction must be undertaken by experienced technical personnel.
Always disconnect the fixture from main power before operate.
Instructions to make the upgrade:
-Disconnect
Infinity Wash XL
from main power and from signal, remove upper and lower cover from the body
uncrewing the proper screws. Eventually, fix the tilt movement turning the handle on the side of the yoke.
Default Fresnel lens
Anello di supporto
-Remove the three nuts which keep in site the
lens and its support ring.
Remove and store the Fresnel lens and its
ring ; temporary remove or fix with adhesive
tape the three washers sited under the lens to
avoid lose them.
3
