1) Press the
menu
button.
2) Press the
+
or
-
buttons until
oPto
(for optical reader) is displayed.
3) Press the
enter
button to confirm your selection. The display will show
on
(for
opto activated).
4) Press the
+
or
-
buttons until
oFF
(opto deactivated) is displayed.
5) Press the
enter
button to confirm your selection.
N.B.
We recommend that the opto be deactivated only if it is obviously defective
and requires replacement.
lamp
This function allows for the on/off control of the lamp via
DMX 512
signal, or for
the permanent on (disenabling DMX control of this function) of the lamp.
1) Press the
menu
button
2) Press the
+
or
-
buttons until
LAMP
(for lamp) is displayed.
3) Press the
enter
button to confirm your selection. The display will show
Strd
(for
standard) which corresponds to the standard configuration whereby the lamp
can be turned on remotely by bringing channel 13 up to 100%, or off at 0%.
4) Press the
+
or
-
buttons until
on
(for on) is displayed. At this setting, the lamp will
remain on regardless of the level set on channel 13.
5) Press the
enter
button to confirm your selection.
coLr
This function allows the colour wheel to be used in a proportional manner via DMX
signal.
1) Press the
menu
button
2) Press the
+
or
-
buttons until
coLr
(for colour wheel) is displayed.
3) Press the
enter
button to confirm your selection; the display will show
Strd
(per
standard) which corresponds to the automatic centring of the colours on the
colour wheel (a change in DMX 512 signal corresponds to a colour change by
the
CF 1200 Spot
.
function display
menu
+
-
enter
function display
menu
+
-
enter
function display
menu
+
-
enter
function display
menu
+
-
enter
function display
menu
+
-
enter
unction display
menu
+
-
enter
function display
menu
+
-
enter
function display
menu
+
-
enter
