Codyson CD-4820, User Manual, Page: 11 / 14

1
OPERATION INSTRUCTIONS
Open the lid , putting the products in the shift in line
and then putting the shift in the tank.
To avoid the scratch and friction of the products,
do not lap them over.
Add the water in the stainless steel tank , the water
should over the surface of the product but within the
range of MIN mark and MAX mark.
Inserting one side of the detachable plug and cord into
the body of the machine, the other to the socket.
(See picture).
180s will be displayed when the power is on. Press ON,
it begins cleaning. 180s is the most common working
cycle. During cleaning, the time displayed on the screen
is the time left.
Pressing "SET", you can choose 5 optional working
cycle:
180S 280S 380S 480S 90S
Red
Note: After cleaning, the water always changed to be"black", push away the dirty
water, and wipe the stainless steel tank, using clean tap water, then cleaning again
using normal way, until can't see the "smoking" dirt, it means cleaning is finished.
Using mesh screening can avoid the attrition between the item and stainless steel tank,
it also can reduce the attrition between items.
When put the item and mesh screening into the tank, the unit also can clean the mesh
screening, therefore, the mesh screening can absorb 15% ultrasonic energy. (Plastic
basket can absorb 20% ultrasonic energy.)
How to use mesh screening
2
9
When cleaning the table wares, the table wares
should keep level. If the table wares overlap together,
while cleaning the items, attrition can be happened,
the table wares will lose gloss as the scrap.
If the item with too much oiled dirt, can use 1 spoons
liquid soap (about 4 ml).
Press "SET" button, choose one circle from 280/380/480S, then press "ON" button, the
unit start to work.
As using liquid soap, so need to wash the item again with clean water, or using clean
water go on cleaning 90S, in order to clear away the liquid soap.
Note: The liquid soap is neutral liquid and very normal for home using, it is "soft" chemical
liquid. Using a little in ultrasonic cleaning, can soft the oiled dirt, to make the oiled dirt can't
condense again on the surface of the item, to enhance result of cleaning.
Put the item on the mesh screening, and then put the
mesh screening into the stainless steel tank. Keep the
item is immerged in the water, ensure the water is above
"MIN-" marking but does not exceed the "MAX-" marking.
3
PUT A LITTLE LIQUID WASH SOAP TO ENHANCE CLEANING:
STRENGTHENED CLEANING FOR CLEANING OILED DIRTY PARTS
Using to clean pneumatic valve, hydraulic directional control valve, fuel injection
precision gear driving sets and bearings which with too much oiled dirt.
This cleaning way also means +
2 3
Used to clean the knife, fork, spoon which with too much oiled dirt. (If with less oiled
dirt, can according to ).
2
put the item on the mesh screening, and then put the
mesh screening into the stainless steel tank. Keep the
item is immerged in the water, ensure the water is
above"MIN-" marking but does not exceed the "MAX-"
marking.
Press the "TC" button, the heater is working, around 40
minutes later, the temperature of the water is about 65
℃
,
the heater will auto shut off. Then put 1 spoons liquid
soap (about 4ml), press "SET" button, choose 480S time
circle, then press"ON" button, the unit start to work.
8
4