Codex BPH830i, User Manual, Page: 24 / 86

19
3 Barcode Printer Operation
3-1 Barcode Printer Operation Interface
Standby key
Make sure the power switch is on, and when press the
“Standby key”, the Touch panel (LCD Display) will light up and show “Ready”. When press and hold
the “standby key” in 3 seconds, then the printer will be getting into “standby” mode.
Feed key
When you press the FEED button, the printer moves the label to the defined stop position. If you are
using continuous labels, pressing the FEED button will move label stock until you release the button
again. If you are using individual labels, pressing the FEED button will move only one label. If the label
does not stop at the correct position, please run the auto calibration (See Section 3-6. for the label
size calibration function) on the label stock.
Pause _ Feed key
If you want to pause the printing, just press the feed key then the printer will be on pause status,
besides, the LCD will show “Pause” till you press the feed key again the printer will not print any
further.
EX, if the printer is setting for 10 pages printing, when user press the feed key during the 2
nd
pages
printing, the printer will stop printing till feed key been pressed again.
Cancel Printing_ Feed key
Press and hold feed key in 3 seconds during printing, the Printer will be backed to standby mode and
LCD will display “Standby”and the printing job has been cancelled.
EX. If the printer is setting for 10 pages printing, when user press the feed key during the 2
nd
pages
printing, the printer will stop printing from the 3
rd
page and back to Standby condition since the rest
printing job has been cancelled.
Touch Panel (LCD Display)
Feed Key
Standby Key