17
http://www.codelight.com
won't be saved when turn off the console, the PB Speed
will automatically resume to 100% when turn on the
console next time.
6.4.1. Create a new Chase
Press Edit Playback and enter “Program Playback” menu;
Choose the Flash button NO. of the
program which needs edit in the Playback section. ( There are 96
Playbacks, each page contains 12
Playback). The red led of Playback
buttons which have saved programs
will twinkle, those led off are empty. Pressing an empty Flash button means you will save a new Chase in
this button;
Create the needed scene and Effect by manual control;
Press S1 to [Save Step], you can save in two ways:
1. If what you want to save is the last step, press S1 and select [Save to Last] to save the step at the end
of the program;
2. Use the Flash buttons to select step No. to save as a Chase step of that Playback program. For example,
you have edited 4 steps. If you press a Flash button whos
e No. is larger than 4, the step will be saved as
the 5th step; If you press Playback button 3, the previous
step saved in button 3 will be replaced. If the led
of the 12 Flash buttons are on, you only need to press S1
and select [Save to Last
]. Then you can see the
step is save as the 13th step and the led of button 1 is turned on (2nd page). When there are more then 12
steps, you can use the Left or Right button to turn over the pages.
If you want to add a moving effect
into one step, please press S4, operation details please refer to the
chapters above. When a chase step have added an moving effect, the item of Effect display Yes;
Repeat the operation of the manual contro
l, new Effect creation and Step Saving;
After finishing all the Chase steps, press Edit Playba
ck and exit to "Live Mode" to run the Playback.
When you save Chase, only two Effects, running simultaneously will be saved in each step.
6.4.2. Chase Step Parameter
When edit Chase step, you can adjust Link mode and independent time of the chase step.
6.4.2.1.
Link Mode
When you programming Chase, you may notice there is
a "Link" entry on the LCD screen, which shows the
link mode of each Chase step. "Link = ON" means the
console will run the new Chase step after finish the present
step; While "Link=OFF" means the present step will pause
after finish, and you need to press Go+ or Go- to run the
next step.
When programming Chase, every chase step will auto
matically endue with a de
fault Link=ON. You can
change the Link mode by pressing the re
levant Flash button of the chase step.
