16
http://www.codelight.com
6.3. Cue
We will introduce the record mode an
d how to record Cue in this part.
6.3.1. Two Record Modes of Cue
Record Mode = Selected.
Only the selected fixtures can be recorded in Cue.
Record Mode = Stage.
No matter whether the fixtures are selected or not, all of them will be saved in Cue.
6.3.2. Save Cue
When recording the Cue, only two
Effects, running simultaneously,
will be saved in each step.
Create the scenes and Effects you need by manual control;
Press Save to Cue and enter "Record Memory/Cue" me
nu, then the red led of Flash button which have
saved program will twinkle;
Press S1 or S2 to select record mode;
If you press the twinkling Flash button, LCD screen di
splay "Playback isn't empty! Overwrite?", if press
S1 to [Confirm], the saved content will be overwritten
(In spite of the content is Cue or Chase). If you
press the Flash button without twinkle,
a new playback will be saved.
6.4. Chase
A chase is composing with some chase steps. Each
of which has 3 timing parameters and Link mode
parameters, which are "HTP FadeIn
", "LTP FadeIn", "LTP wait".
Each chase step time called independent time. When edit program step, console automatically give out
independent time and Link default value:
HTP FadeIn=0, LTP FadeIn=1, LTP wait=0 (sec.), Link=ON.
Please pay attention: when editing, user can change the independent time value of one of the chase steps. Once
it is changed, the relevant chase step time won't be superseded by the global time.
Each of Chases has a global time as well. When changing the global time of the Chase, the global time will
supersede the default independent time value of the chase step, but won't react on the chase step time which
independent time had been changed. After changing, the global time will be saved.
While Chase is running, you can temporarily use the Cont
rol Wheel B to adjust the speed rate of one of the
Playback (PB Speed), adjusting range is 10% - 500%. Th
e Chase global time multiply the percentage is the
actual running time of the present chase step.
When actual running, the Chase global
time is use for controlling the ba
sic running speed of the relevant
program, while the PB Speed is use for temporarily changing the Chase speed. The temporarily speed rate
