background image

9

D008736_04 CortexOPOS User Manual

12.0 - Using the Microsoft POS for .NET Sample Application

Microsoft provides the 

Microsoft Point of Service for .NET 

or

 Microsoft POS for .NET 

library that includes 

a sample application that can be used with OPOS drivers—including the CortexOPOS™ driver for Code 

barcode readers—to test communication with OPOS devices. This software can be downloaded from 

 

Microsoft at 

microsoft.com/en-us/download

.

12.1

 

-

 

Install the 

Microsoft POS for .NET

 software.

12.2

 -

 

Open the 

TestApp.exe 

sample application 

(close any other OPOS applications, including 

CortexOPOS™ Device Manager, and any other Code 

applications).

12.3

 - Make sure you have a properly configured 

Code reader connected to the computer. Expand 

the 

Scanner

 block in the left pane, and select the 

device name specified for the connected Code 

Reader (

Code Barcode Reader

 by default).

12.4

 - Press 

Open

, then 

Claim 

to connect to the 

reader.

12.5

 - Check the 

DeviceEnabled

, the 

DataEventEn-

abled

, and the 

Decode Data 

checkboxes. Scan a 

barcode and see the results in the bottom window.

Summary of Contents for CORTEXOPOS CR2600











Reviews: