Code Blue
•
259 Hedcor Street
•
Holland, MI 49423 USA
•
800.205.7186
•
www.codeblue.com
GU-160-T
page 24 of 65
CB 4 Series
Administrator Guide
14 CB 4-s Installation Instructions
1.0 PRE-INSTALLATION
1.1
Electrical preparation
– The unit may have supply wires run from either A) behind the unit
through the wall, or B) below the unit using an external conduit through the bottom of the
unit’s back plate. Holes in the back and bottom of the unit have been provided for this pur-
pose.
2.0 INSTALLATION PROCEDURES
2.1
Mark the mounting holes
– In order to comply with the Americans with Disabilities Act
(ADA) of 1990, the speakerphone button(s) should be positioned between 34 and 48 inches
from grade level. (Consult an ADA specialist in your area to verify local and federal guide-
lines.)
2.2 Drill all marked holes.
2.3
Secure the housing to the wall
– Four anchors of appropriate size and type should be
used to securely fasten the housing to the wall or pole mount.
IMPORTANT:
If wiring is coming in from the back, ensure that the conduit is aligned at this
time.
2.4 Connect electrical and communications wiring. Follow all federal and local codes that apply.
