background image

4

2012 Audiovox Electronics Corporation. All rights reserved.

  Using the Progressive Car Finder Feature

Use the car finder feature to locate your vehicle. The system will sound 5 times at
low volume, increasing in volume each time the button is pressed.

1 Way Transmitter - Press and release 

.

2 Way Transmitter - Press and release   +  .

  Using the Personal Protection Alarm (Panic)

Press and hold the button(s) shown below for 3 seconds to activate the personal
protection alarm . During panic mode, the normal function of the transmitter buttons
will be suspended. The transmitter’s   and   buttons can be used to lock and
unlock the door (if the option is installed). To stop the alarm, press and hold the
button(s) on the transmitter again for 3 seconds. The system will automatically
stop after 30 seconds.

1 Way Transmitter - Press and hold 

 for 3 seconds.

2 Way Transmitter - Press and hold   +   for 3 seconds.

  Two Stage Door Unlock (Optional)

If this feature is enabled on your system, pressing the    button one time will
unlock only the driver’s door. Press   again to unlock the remaining doors.

  Eliminating Arm / Disarm Notification Chirps

System ARM/DISARM chirps can be toggled ON or OFF without entering the
programming feature banks.

1. Turn the ignition ON then OFF.
2. Press and release the valet/programming button 3 times. The system will
respond with 1 chirp for ON or 2 chirps for OFF.

  Disarming the Security System

To disarm the system press the   button. The parking lights will flash 1 time,
indicating the system is disarmed and has unlocked the doors (if equipped and
connected).
NOTE: The system is defaulted with Silent Choice enabled, which requires a
second press of the   button to activate an audible arming response from the
vehicle.

Summary of Contents for Procomp

























Reviews: