Code Alarm Procomp Owner'S Manual Download | Manualshive

Page: 22 / 24

background image

22

2012 Audiovox Electronics Corporation. All rights reserved.

Replacing Remote Control Batteries

CAETX91 1 Way 6 Button Remote Control:

The battery (model CR2032) inside each remote control should last approximately 1
year under normal use. When the battery becomes weak you will notice the remote
control range (the distance from the vehicle the remote control will work) deteriorate
and the small LED on the remote control will dim. To replace the remote control
batteries:

1. Remove 2 side panels and 1 screw then disassemble the halves of the remote
control.
2. Remove the old battery, observing the +/- symbols on the batteries and
replace with new CR2032 battery.
3. Reassemble the halves of the remote control and install the 2 side panels and 1
screw.
4. Test operation of the remote control.

Replacement remote control part number:

CAETX91

CATXCOMP 2 Way OLED Remote Control:

The battery inside the 2 way OLED remote control is rechargeable, use the supplied
battery charger to charge the battery until the battery icon on the OLED screen
shows charging is complete. It is recommended that the battery be fully charged
before normal use.

Replacement remote control part number:

CATXCOMP

«
...
20
21
22
23
24
»

Summary of Contents for Procomp

























Reviews:

No comments

Related manuals for Procomp

Brand: S Fire Pages: 2

Brand: Viper Pages: 17

Protek Wireless IW-101A

Brand: Innotek Pages: 4

Brand: TFA Pages: 30

Brand: Famco Pages: 4

Brand: La Crosse Technology Pages: 13

Brand: Lenoxx Pages: 7

Brand: Nemaxx Pages: 72

Brand: Hama Pages: 4

Brand: Steelmate Pages: 14

Brand: Steelmate Pages: 16

Brand: Deltronic Security Pages: 9

Brand: G-project Pages: 20

Brand: PURSUIT Pages: 6

FullStop Security Nemesis FPC100-6

Brand: Purple Line Pages: 2

Brand: KREAFUNK Pages: 46

Brand: CrimeStopper Pages: 32

Brand: CrimeStopper Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands