Code Alarm PowerCode PC 6100, Owner'S Manual, Page: 4 / 12

4
* Throughout this manual, ‘press’ refers to pressing for less than 1 second; ‘press and hold’ refers to pressing
for more than 1 second.
** ‘Siren’ also refers to the vehicle horn if it is used as the alarm sounding device.*
† If you have chosen the Silent Arming Option, the siren will not sound when arming or disarming until the
appropriate button is pressed a second time.
Locking the Vehicle Doors
To lock the vehicle doors, exit the vehicle, close all doors, then press*
the LOCK button. The horn** will “honk” twice
†
and the parking lights
will flash twice, indicating the system is locked and the starter disable
is armed. The status indicator (red warning light on the dash) will blink
steadily, once per second, if equipped.
Unlocking the Vehicle Doors
To unlock the system, press the UNLOCK button. The horn will “honk”
and the parking lights will flash once, and the doors will unlock.
The courtesy light will turn on for 1 minute, or until the vehicle is
started, and the starter disable will turn off.
Using Your Remote Transmitter
Press to LOCK the
Vehicle Doors*
Press and hold for
auxiliary function
Press for Car Finder
Press and hold for
Panic Alarm
Press to UNLOCK
Vehicle Doors
Press for two-car
operation (SHIFT)
Press and hold to
open trunk