8
Adding Remote Controls to Your System
The PowerCode
TM
has the ability to operate from up to eight (8)
remote controls. Follow these instructions to add a remote control to your
system.
1. Make sure the security system is disarmed and the ignition is off.
2. Open the driver’s door.
3. Turn vehicle ignition on.
4. Press and hold emergency override button.
After 15 seconds, the siren or horn will sound three (3) times.
This indicates that the unit has entered the remote control
programming mode.
5. Release the button.
6. Press the ARM button (button 1) on the remote control to be
programmed.
The siren or horn will sound once, indicating that the system
has “learned” that remote control.
7. Repeat step 6 for any additional remote controls.
8. Turn the vehicle ignition off to exit the programming mode. Test
all remote controls to ensure that they work properly.
Deleting Lost or Stolen Remote Controls from Your System
If one of your remote controls is lost or stolen, follow these instructions
IMMEDIATELY to remove the control code from your system.
1. Have all remaining remote controls available.
2. Enter the control programming mode by following steps 1 - 5 of
Adding Remote Controls to Your System
(page 8).
3a.If you have only one remaining remote control, press the
ARM button on that remote control eight (8) times, pausing at
least 1 second between each press. Make sure that the siren
chirps each time you press the ARM button.
3b.If you have two remaining remote controls, press the ARM
button on each remote control four (4) times, pausing at
least 1 second between each press. Make sure that the siren
chirps each time you press the ARM button.
3c.If you have three remaining remote controls, press the ARM
button on the two remote controls three (3) times, then press
the ARM button on the remaining remote control twice. Pause
at least 1 second in between each press. Make sure that the
siren chirps each time you press the ARM button.
4. Turn the vehicle ignition off to exit the programming mode.
When you are finished, the lost or stolen remote control will no
longer operate your system.
Summary of Contents for PC 4400
Page 15: ...15...
