background image

6

2010 Audiovox Electronics Corporation. All rights reserved.

Using Your Remote Vehicle Starter

  Car Jack Mode

This feature must be turned on in system programming, please consult your
installing dealer.

Triggering Car Jack mode: While the ignition is ON and press and hold   +   for 2
seconds, the parking lights will flash 1 time and the system will act as follows;

1.

50 seconds after being triggered the siren will chirp for 15 seconds,
during this 15 seconds you will be alerted to push the valet button to
turn off Car Jack mode. If Car Jack mode is not turned off at this time it
will advance to the next step.

2.

Following the 15 second chirps (total time now 65 seconds) the siren
will go into full sound and the parking lights will start flashing.

3.

90 seconds after trigger in, addition to the siren and parking lights, the
system will activate the starter kill. THE SYSTEM WILL REMAIN IN THIS
STATE UNTIL THE BATTERY IS DEPLETED.

OVERRIDE THE SYSTEM TO TURN OFF CAR JACK MODE: Turn the ignition OFF
then On and press the valet button within 10 seconds.

  Remote Starting Your Vehicle

To activate the remote vehicle start function, press and release the   button 2
times within 2 seconds.  The system will sound, the parking lights will flash 1 time
and the system will check the vehicle to ensure it is safe to start.  If all safety
parameters are correct, the vehicle will start within 5 seconds.  The vehicle’s
parking lights will turn on (or flash depending on system settings) as a visual
indication that the vehicle has started and is running.

If your vehicle stalls or does not start, the system will pause 5 seconds, then try 2
more times to start the vehicle (a total of 3 attempts).  The system will pause 5
seconds between each start attempt.  If the vehicle does not start after the 3rd
attempt, the system will abort the remote vehicle start process.

  Remote Start Shutdown

Press and hold the   button for 3 seconds to turn the vehicle off.

Summary of Contents for CA 6151















Reviews: