Code Alarm Ca 1053 Owner'S Manual Download Page 5

5

2012 Audiovox Electronics Corporation. All rights reserved.

 Using the Personal Protection Alarm (Panic)

 

Press and hold the 

 button for 3 seconds to activate the personal protection alarm. 

During panic mode, the normal function of the transmitter buttons will be suspended. 

The transmitter’s 

 and 

 buttons can be used to lock and unlock the door (if the 

option is installed). To stop the alarm, press and hold the 

 button on the transmitter 

again for 3 seconds. The system will automatically stop after 30 seconds.

 Car Jack Mode

 

This feature must be turned on in system programming, please consult your installing 

dealer.

  Triggering Car Jack mode: While the ignition is ON and press and hold 

 +   for 2 

seconds, the parking lights will flash 1 time and the system will act as follows;

   

1.   50 seconds after being triggered the siren will chirp for 15 seconds,  

 

 

during this 15 seconds you will be alerted to push the valet button to  

 

 

turn off Car Jack mode. If Car Jack mode is not turned off at this time it  

 

 

will advance to the next step.

   

2.   Following the 15 second chirps (total time now 65 seconds) the siren  

 

 

will go into full sound and the parking lights will start flashing.

   

3.  90 seconds after trigger in, addition to the siren and parking lights, the  

 

 

system will activate the starter kill. THE SYSTEM WILL REMAIN IN THIS  

 

 

STATE UNTIL THE BATTERY IS DEPLETED.

  OVERRIDE THE SYSTEM TO TURN OFF CAR JACK MODE: Turn the ignition OFF 

then On and press the valet button within 10 seconds. 

 

Summary of Contents for Ca 1053











Reviews: