Page 7 of 12
Flash Pattern Instructions: SUPERVISOR FLEX Multi Color Units
INSTALLER NOTE: FLASH RATE + FLASH SEQUENCE = FLASH PATTERN
Lighthead Flash Sequences - Multi Color
LEFT / RIGHT
(DEFAULT):
PRIMARY & SECONDARY
PRIMARY ONLY -
LEVEL - 1 DEFAULT
SECONDARY ONLY
PRIMARY W / SECONDARY POPS -
LEVEL - 3 DEFAULT
PRIMARY W / SECONDARY RANDOM
EVEN / ODD:
PRIMARY & SECONDARY
PRIMARY ONLY -
LEVEL - 2 DEFAULT
SECONDARY ONLY
PRIMARY W / SECONDARY POPS
PRIMARY W / SECONDARY RANDOM
IN / OUT
PRIMARY & SECONDARY
PRIMARY ONLY
SECONDARY ONLY
PRIMARY W / SECONDARY POPS
PRIMARY W / SECONDARY RANDOM
RANDOM:
PRIMARY & SECONDARY
PRIMARY ONLY
SECONDARY ONLY
PRIMARY W / SECONDARY POPS
PRIMARY W / SECONDARY RANDOM
CYCLE SEQUENCE
RANDOM:
PRIMARY & SECONDARY
PRIMARY ONLY
SECONDARY ONLY
PRIMARY W / SECONDARY POPS
PRIMARY W / SECONDARY RANDOM
ALL ON
RANDOM:
PRIMARY & SECONDARY
SWEEP
LEFT / RIGHT:
PRIMARY & SECONDARY
PRIMARY ONLY
SECONDARY ONLY
PRIMARY W / SECONDARY POPS
PRIMARY W / SECONDARY RANDOM
NULL:
ALL LIGHTHEADS OFF
Lighthead Flash Sequences - Multi Color
Double Flash-75
- LEVEL - 2 DEFAULT
Triple Flash-75
Quad Flash-75
Quint Flash-75
Double Flash-150
- LEVEL - 3 DEFAULT
Triple Flash-150
- LEVEL - 1 DEFAULT
Quad Flash-150
Quint Flash-150
Triple Pop Flash-150
Quad Pop Flash-150
Single Flash-375
Cycle Rates
Cruise
TD Steady
Scene Steady
2 Outer Secondary Steady 2 Inner Secondary
All 6 Secondary
2 Outer Secondary Flicker 2 Middle Secondary
4 Outer Secondary Steady 2 Outer Secondary
4 Outer Secondary Flicker 4 Inner/Middle
Secondary
6 Outer Secondary Steady 4 Outer/Middle
Secondary
6 Outer Secondary Flicker 4 Inner/Outer
Secondary
Cruise is configurable to any symmetric setting. TD Steady is
configurable to any symmetric setting
Cruise is lowest priority and will not work when any other feature is
enabled. Different combinations of lights can be used as Cruise by
tapping the Sequence wire to +12V while
Only the Cruise
is turned
on.
TD Steady will work with or without Level 1, 2, or 3 lights engaged.
Different combinations of lights can be used as the TD by tapping the
Sequence wire to +12V while
Only the TD Steady
is turned on.
Scene Steady overrides all other functions.
Directional Module Flash Pattern
Cycle Flash-70 - (DEFAULT)
Variable Flash Single
NFPA Quad Flash-80
Cycle Flash-150
Quad Flash-70
Five Flash-150
Steady Burn
Quad Flash-150
Five Flash-70
Triple Flash-150
Triple Flash-70
Double Flash-150
Double Flash-70
Single Flash-150
Single Flash-70
Single Flash-250
Quad Pop Flash-70
Single Flash-375
Triple Pop Flash-70