Coda, Inc. • 30 Industrial Avenue • Mahwah, NJ 07430 Phone: 201-825-7400 Fax: 201-825-8133
Email:
www.codamount.com
Cold-Mount ® is a registered trademark of Coda Inc.
Cold-Mount® Laminator Operation Manual
January 2006
Adjusting the Rollers for Even Pressure
Figure 7
Using the gap adjusting knobs, lower
the right side of the top roller so that it
almost touches the bottom roller.
Then do the same on the left side.
Figure 8
Next make the fine adjustment on the
right by turning the gap adjusting
knob clockwise until the rollers just
touch. Then do the same on the left
side until the rollers are parallel.
