Coda, Inc. • 30 Industrial Avenue • Mahwah, NJ 07430 Phone: 201-825-7400 Fax: 201-825-8133
Email:
www.codamount.com
Cold-Mount ® is a registered trademark of Coda Inc.
Cold-Mount® Laminator Operation Manual
January 2006
Laminating a Print with a Sheeted Laminate (continued)
Figure 22
Start the laminator while holding the
release liner and run it as slow as
possible. Running slow applies the
pressure for a longer period of time
across the entire width which will
result in a better adhesion of the
laminate to the print.
Be sure to hold the release liner,
peeling it back slowly as the
laminate is fed into the laminator. Be
careful not to allow the release liner
to feed into the laminator and get
pinched between the rollers.
Figure 23
