Coda 40.0 Operation Manual Download Page 13

STEREO
Rated Power:                        400 Watts class AB @ 8 Ohms,

   

       800 Watts class AB @ 4 Ohms

Frequency Response:        DC to -3dB @ 100kHz
Distortion:                            < .02 percent from 10Hz  to 20kHz @ rated power
Gain:                                   26dB
Maximum Current:             >100 Amperes peak per channel
Noise:                                  -120dB referenced to rated output
Input Impedance:             50k Ohms unbalanced/10k Ohms balanced
Output Impedance:          .03 Ohms from 20Hz to 20kHz

BRIDGED MONO
Rated Power:                     1600 Watts class AB @ 8 Ohms
Frequency Response:        DC to -3dB @ 100kHz
Distortion:                    <  .02  percent  from  10  Hz  to  20kHz  @  rated power
Gain:                                    32dB
Maximum Current:              >100 Amperes peak
Noise:                                   -120dB referenced to rated output
Input Impedance:              N/A unbalanced/10k Ohms balanced
Output Impedance:           .06 Ohms from 20Hz to 20kHz

Transformer Rating:             2 x 2 kVA (EU: 1 x 3 kVA)
Power Filtering:                    200,000 µF

Transformer Type:                Multi-tap, multi-winding toroidal

POWER SUPPLY    

DIMENSIONS
Height:                                 7" Faceplate,  7.75" Overall
Width:                                  17.5" Overall
Depth:                                 19" Overall
Weight:                                110 lbs.,  115 lbs.,  Shipping
Power requirement:            1K Watts maximum at rated power

TECHNICAL DATA

12

Summary of Contents for 40.0



















Reviews: