5. Emergency Procedure
Emergency Responder’s Guide
18
High Voltage System Shutdown- Rear Service Disconnect
Disconnecting the RSD is the only shutdown method that fully disconnects the vehicle from the
high voltage battery.
Perform the following steps:
1.
Remove rear seat cushion.
Remove 13mm mounting bolts Remove rear seat cushion
2.
Remove access panel on the rear left floor.
Remove the cover screws Open the cover
3.
Unplug the Rear Service Disconnect plug.
Insert tool to release tab Lift and pull latch handle Completely unplug connector
Unplug HVIL connector Unplug rear power distribution box connector
4.
Wait 2 minutes to ensure that the high voltage is fully disconnected.
