EN
G
LI
S
H
5
e)
Maintaining power tools. Check for any incorrect settings, parts that catch,
broken parts or anything else which may cause the power tool to malfunction.
If something is damaged it must be repaired before use.
Many accidents are
caused by poorly maintained power tools.
f)
Keep tools sharp and clean.
Properly maintained cutting tools with sharp blades
are less likely to jam and are easier to control.
g)
Use the power tool, accessories and similar according to instructions and in
an appropriate manner suitable for the type of power tool used. Also, take
into consideration your work environment and the type of work to be done.
Using the power tool for a purpose other than that for which it is intended could
result in a dangerous situation.
5) Use and maintenance of cordless power tools
a)
Make sure that the power switch is set to OFF before fitting the battery.
Attaching a battery to a power tool when the power switch set to ON increases
the risk of an accident occurring.
b)
Only charge the battery using a charger approved by the manufacturer.
A charger suitable for one type of battery can pose a fire hazard if used for another
type of battery.
c)
Only use rechargeable batteries that are strictly compatible for those
particular drill/drivers.
The use of other types of batteries might cause damage
or fire.
d)
When the battery is not in use, store it at a safe distance away from metal
objects such as paper clips, coins, keys, screws and other small metal
objects that can bridge the gap between the battery terminals.
Short circuiting
the battery terminals can cause burn injuries or fires.
e)
If the battery is damaged it can leak acid; avoid contact with this acid.
If you accidentally come into contact with the acid; rinse with water. Consult
a doctor if the acid comes into contact with your eyes.
Battery acid can cause
burns and irritation to the skin and eyes.
6) Service
a)
Repairs and service should only be performed by qualified tradesmen,
and only with original spare parts.
This guarantees that the power tool is
safely maintained.
General safety instructions for batteries and chargers
• Never attempt to open a battery.
• Never store a battery in direct sunlight or at temperatures above 40 °C.
• Only charge the battery when the ambient temperature is between 4 and 40 °C.
• Never expose the battery or charger to water.
Summary of Contents for HD 10.8-LI
Page 2: ...2 ...
