EN
G
LI
S
H
5
Risk of explosion
• Never use the compressor in areas where flammable liquids/materials or gases
(petrol, solvents, gas cylinders, etc.) are stored or used.
• Never use the plug to turn the compressor on or off, always use the power switch.
• Always unplug the mains lead and empty the pressure tank of air before servicing
or repairing the compressor.
• Always unplug the mains lead and empty the pressure tank of air before moving
the compressor.
• Make sure that the mains lead does not come into contact with heat, oil, or
sharp edges.
• Never move the compressor around by pulling the mains lead or air hoses.
The compressor must only be moved using the handle.
• Make sure that any air hoses and pneumatic tools connected to the compressor
are rated to withstand the pressure generated by the compressor and that they are
connected correctly.
• The compressor is only intended for use in well-ventilated areas in temperatures
between 5–40°C.
• Never expose the compressor to water or other liquids.
Risk of personal injury
• Never use the compressor if the pressure tank has been damaged in any way.
• Make sure that all air hoses are intact and dimensioned for the capacity of the
compressor.
• Never attempt to repair damaged air hoses, always replace them.
• Never move or transport the compressor when the pressure tank is under pressure.
• Never disconnect any connectors when the pressure tank is under pressure.
• Never tamper with or modify the pressure tank or any other part of
the compressor.
• Never point the air hose nozzle or attached tools at other people or pets.
• Never use compressed air to clean work wear worn by you or anyone else.
• Never insert fingers or foreign objects into the housing of the compressor.
Dangerous voltage
• The compressor must only be connected to an earthed 230 V, 50/60 Hz mains
outlet protected by a 30 mA residual current device (RCD).
• Always connect the plug to an easily accessible mains outlet so that it can quickly
be unplugged should a fault occur.
Risk of burns
• Certain parts of the compressor can become hot during use. Touch only
the handle and the power switch when using the compressor.
