EN
G
LI
S
H
9
2. Attach the air filters to the compressor.
3. Place the compressor in a dry and well ventilated place.
4. Make sure that it is stable and cannot tip over.
5. Make sure that the oil level is up to the red circle in
the oil level window (12).
6. Connect the mains lead to a permanently installed
230 V wall socket.
Note:
Before using the compressor for the first time:
Open the drain tap (9) in the bottom of the pressure vessel,
switch the compressor on using the ON/OFF button (7)
and let it run for 10 minutes to lubricate all the moving
parts. Close the drain tap.
Use
1. Check the oil level in the window (12).
2. Attach a suitable air tool: blow gun, spray gun, tyre inflator, etc.
3. If necessary: Read the instruction manual of the connected air tool and set
the recommended working pressure using the regulator (3).
• Use SAE 30 compressor oil at temperatures over +10 °C.
• Use SAE 10 compressor oil at temperatures under +10 °C.
After use
Depressurise the pressure tank by unscrewing the safety valve before disconnecting
the attached accessory.
1. Turn off the compressor and pull out the plug from the mains outlet.
2. Depressurise the compressor by unscrewing the safety valve.
Getting started
1. Attach the wheels and rubber feet to the pressure vessel.