EN
G
LI
S
H
6
4. Do not use blunt or damaged saw blades. Bent saw blades can easily break or
cause kickback.
5. Start the saw and let it run up to full speed before starting to cut.
6. Keep the footplate against the workpiece at all times. Extra care should be taken
when using the saw with the footplate tilted so as not to exert undue lateral force
onto the saw blade.
7. Secure the workpiece with a clamp, vice, etc.
8. Make sure that the settings are correct and that the blade is securely fastened in
the blade holder before beginning to saw.
9. Make sure that the saw blade has come to a complete stop before removing
the saw from the cut. The saw blade should not be stopped by applying lateral
force to the side of the blade.
Safety Warnings for battery pack
a)
Do not dismantle, open or shred cells or battery pack.
b)
Do not short-circuit a battery pack. Do not store battery packs haphazardly
in a box or drawer where they may short-circuit each other or be short-
circuited by conductive materials.
When the battery pack is not in use, keep it
away from other metal objects, like paper clips, coins, keys, nails, screws or other
small metal objects, that can make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a fire.
c)
Do not expose the battery pack to heat or fire. Avoid storage in direct sunlight.
d)
Do not subject the battery pack to mechanical shock.
e)
In the event of battery leakage, do not allow the liquid to come into contact
with the skin or eyes. If contact has been made, wash the affected area with
copious amounts of water and seek medical advice.
f)
Seek medical advice immediately if a cell or battery pack has been swallowed.
g)
Keep the battery pack clean and dry.
h)
Wipe the battery pack terminals with a clean dry cloth if they become dirty.
i)
The battery pack needs to be charged before use. Always refer to this
instruction and use the correct charging procedure.
j)
Do not maintain the battery pack on charge when not in use.
k)
After extended periods of storage, it may be necessary to charge and
discharge the battery pack several times to obtain maximum performance.
l)
The battery pack gives its best performance when it is operated at normal
room temperature
(20 ± 5 °C).
m)
When disposing of battery packs, keep battery packs of different
electrochemical systems separate from each other.
