EN
G
LI
S
H
3
Airbrush
Art.no 40-9513
Model HS-28PSK
Please read the entire instruction manual before use and save it for future reference.
We reserve the right for any errors in text or images and for making any necessary
technical changes to this document. If you should have any questions concerning
technical problems please contact our Customer Services.
Assembly
1. Attach one end of the air hose to the pressure source (compressor or aerosol can)
and the other to the airbrush.
2. The air pressure should lie between 1–3.5 bar. Normal working pressure is 2 bar.
We recommend using a pressure regulator with water separator in order to avoid
moisture problems. For large jobs, an air compressor with a tank is recommended.
The included adapter enables you to connect the hose to a 1/4
″
air outlet coupling.
3. Pour the paint into the paint reservoir. The paint should be relatively thin, about half
the thickness of paint used for brushing (see
Mixing colours
further on in the text).
Attach the paint reservoir to corresponding hole on the airbrush. Hold the airbrush
perpendicular to the work surface.
4. Press down the trigger lever and pull back until it sprays. Use a lower air pressure
when spraying close to a surface. The closer you spray the narrower the stream.
The airbrush is pre-adjusted from the factory to provide a narrow stream.
How to spray
The best result is obtained when sweeping the airbrush along at an even speed.
Commence the sweep before pressing the trigger lever and continue movement
even after releasing the trigger lever.
Commence
sweep here
Press finger
lever
Continue sweeping
with even speed
Turn off
the stream
End
the sweep
Work surface
Paint thickness
Curved sweep
NOTICE! Do not sweep the airbrush in an arc.
