EN
G
LI
S
H
4
1 2 3
Product description
1. Charger
2. Power/Full charge
indicator
3. Charging indicator
Operating instructions
Charging the battery
Temperature range for charging and storing the battery: 0–40 °C.
1. Plug the charger into a wall socket (230 V, 50 Hz). The power indicator (2) will flash green
when the charger is connected to the mains.
2. Insert the battery into the charger, making sure
that it clicks into place.
3. The charging indicator (3) shines red when
charging is in progress.
4. The charging indicator (3) goes out and the full
charge indicator (2) shines green when the battery
is fully charged.
5. Press in the buttons on the battery and remove it
from the charger when it is fully charged.
6. Unplug the charger from the wall socket when it is
not in use.
Battery charge status indication
Press in the red button on the battery to check the charge status. If all the green lights come on
the battery is fully charged. If only one green indicator comes on, the battery is discharged and
needs to be charged before you can use it.
Note:
• The lithium-ion battery has a built-in electronic deep discharge protection which prevents partial
power from being delivered. Full power is provided at all times until the electronic protection
engages, turning off the tool and signifying that the battery needs to be recharged. The tool will
be switched off automatically. Do not continue work after this point, as doing so may damage
the battery. A battery recharge is now required before any work is resumed.
