14
info@
cocoonfires
.com
www.
cocoonfires
.com
TROUBLESHOOTING AND OPERATIONAL TIPS
•
The
first fill
will take longer as the material inside the
Fuel Tank
will absorb the fuel. Subsequent
filling should be quicker. Take care to not fill the C
ombustion Chamber
at a faster rate than
what the material inside can absorb the fuel.
•
If the fire
does not extinguish
the first time by closing the
Sliding Lid
follow these steps and
repeat if necessary.
o
Check that the surface below the
Sliding Lid
is clean and free from obstruction.
o
Using the
Sliding Lid Handle
, apply downward force and in one quick motion move
the
Sliding Lid
towards the closed position. If the flame is still visible repeat this step as
a double motion still applying strong downward force in quick succession.
•
Never blow on the flame
whilst the
Sliding Lid
is in an open position.
•
If after some time you find the
Sliding Lid
has
become ‘sticky’
when attempting to move it
then remove the
Sliding Lid
from its housing and rub the underside using the green side of a
Scotch Bright scouring pad. Take care to only scrub in the direction of the brushing lines of the
stainless steel.
•
Make sure you keep your
Combustion Chamber
clean especially the surface that the
Sliding
Lid
slides on and ensure that any excess fuel on the surface of the
Combustion Chamber
is
wiped off before use.
•
MAKE SURE THAT ALL PARTS HAVE COOLED OFF COMPLETELY BEFORE CLEANING:
o
To clean dust, wipe with a dry cloth or sponge.
o
To clean stainless steel parts, use bioethanol or Acetone.
o
Make sure the
Sliding Lid
for the
Combustion Chamber
slides correctly and fully after
cleaning and that any excess cleaning product has been wiped off completely.
