Max Depth Alarm:
This option allows the diver to select a maximum depth, below
which the diver does not wish to descend before an alarm is sounded. This function is
disabled when in the Decompression Mode. The Field Programming Mode previously
described may also modify this setting. As shipped from the factory, the Depth Alarm is
set for 39 metres.
Select Nitrox Computations (Off or On):
This option enables and disables NITROX
computations. If this option is disabled, mixtures other than 21.0% oxygen will be
disallowed. Furthermore, if this option is selected as OFF, the
CO
will not
compute CNS Toxicity, OTU Dose, or maximum PO2 alarm. The factory setting for this
option is ON.
Enter Oxygen % in Nitrox Mixture:
This option allows you to enter the desired oxygen
percentage in 0.1% increments. Values from 21.0% to 50.0% may be entered. The
Field Programming Mode previously described may also modify this setting. As shipped
from the factory, this is set to 21.0%.
Max PO2 Alarm:
This option allows the diver to select a maximum PO2 (Partial
Pressure of Oxygen) at which an alarm is sounded. Values from 0.50 to 1.60 are
allowed. This is set to a PO2 of 1.6 at the factory before shipping.
Profile Storage Period (1 to 15 Seconds):
This option allows the diver to select the
sample rate at which data is stored for later recall by the
Analyst
®
. This option does not
affect how frequently the computer performs its calculations, but only how often data of
the dive in progress is stored for later retrieval. The faster (lower the number) the profile
storage period, the more precise the re-creation of the dive will be.
42
