Page 2 of 3
d.
While holding the powered-up Roger X within one inch of the Roger inspiro, press the soft key
under Connect on the Roger inspiro.
e.
If the operation is successful, the message “Roger X is connected” will appear on the screen of
the Roger inspiro.
Daily Classroom Routine
Before instruction begins:
1.
Teacher to position the Roger Inspiro microphone about 20 cm below his/her lips.
2.
Turn ON the Roger Inspiro.
3.
Turn ON the MM2+ with the Roger X inserted in the FM connector.
4.
Press the Mode button on the MM2+ until the FM icon is lighted green.
5.
Activate streaming on the Kanso by pressing and holding the button on the Kanso for 3 seconds until
a 3-tune melody is heard by the student and the LED blinks blue.
Alternatively, STREAMING can be activated with the Remote Assistant. From the home screen, press
the right arrow key until the STREAM screen is displayed. Press the down arrow key until “1 Mini
Mic” is highlighted. Press OK. The LED on the Kanso will start blinking blue and the MM icon will
appear on the home screen of the Remote Assistant.
