Coccolle Ravello, User Manual

Page: 11 / 14

EN
Safety warnings
Thank you for choosing our product. Please always read all the instructions carefully before use and
remember, your child's safety may be affected if you do not follow these instructions. The stroller is
suitable for children under 36 months. The maximum load of the stroller is 15kg, never overload.
1. Never leave the child unattended.
2. Ensure that all locking devices are locked before use.
3. The parking device shall be engaged when placing and removing the child from the stroller.
4. To avoid any injury please keep away the child when folding or unfolding the stroller.
5. Do not let your child play with this product.
6. Always use the restraining system.
7. This product is not suitable for running or skating.
8. Do not use if any part is broken, torn or missing.
9. It may be dangerous to leave your child unattended.
10. Accessories not approved by the manufacturer shall not be used.
11. Avoid placing the stroller near heated surfaces or open fires as the stroller grants the child easy
access to hazardous situations.
12. Always use the crotch pad in combination with the waist belt.
13. Always use the safety belt and ensure that it is properly fitted.
14. Any load on the handle might affect the stroller's stability.
15. Use the stroller for just one child at time.
16. The maximum possible loading of the shopping basket is 5 kg.
17. For newborn baby, you should use the fully reclining position as the baby doesn't have yet the
ability to control his head.
18. Any load attached to the handle or back of the stroller will affect it's stability.
19. Use only replacement parts supplied or recommended by the manufacturer.
Spare parts list
1- Folding device
2- Push bar
3- Shopping basked
4- Rear wheels
5- Front wheels
6- Safety belt
7- Bumper bar
8- Canopy
Before installation please check the components and make sure you have all of them in your
package. Do not start assembly without all the spare parts. In case anything is missing contact the
manufacturer.
Assembly
1. Unfolding the stroller: open the safety lock. Grab the handle and pull it upward to spread the
frame out. Make sure the stroller is fully unfolded.
2. Installation of the rear wheels: slightly lift the frame up and fully insert the rear wheel on the side
of the frame. Repeat on the opposite side as well. Before usage, try to slightly pull the wheels out to
make sure that they are properly fixed.
3. Removal of the rear wheels: pull the release button downward and pull out the rear wheel to
remove it from the frame.
4. Inserting the convertible carrycot: insert both ends of the carrycot into the frame until you hear the
click sound.
5. Removal of the bumper bar: press the button on both sides of the bumper bar, then pull and
remove it from the frame.
6. Adjustment of the backrest: use the adjusting belt behind the backrest to adjust the backrest to
lying or sitting position.
7. Adjustment of the footrest: buckle the belts under the sleeping basket first. Pull the two buttons on
both sides of the footrest and then adjust the position of the footrest.
8. Adjustment of the position of the convertible carrycot: press down the two buttons on both sides of
the sleeping basket so you can adjust the position. The carrycot can be adjusted into 3 angles.
9. Reversing the convertible carrycot: grab the two buttons as shown in the picture to remove the
carrycot. Turn the carrycot to the other side and re-insert it on the frame.
10. Adjusting the canopy: the canopy can be adjusted directly by pulling it in the desired position.