UNFOLDI
NG TH
E ST
R
OLLE
R
.
2,
3).
ATT
ACHI
NG
AND
D
ET
ACHI
NG REAR WH
EELS
suspension
.
Slide the pointed end of the half axle into the opening in rear
5).
NOTE! Before starting to use the pram, make sure that all the wheels
have been assembled correctly
.
To disassemble the rear wheels, press down the button in the
central part of the wheel (Fig
.
6)
and remove the wheels from the axle
(Fig
.
7).
To detach the rear half axle push the button in rear suspension
A
SSEMBLI
NG
AND
DIS
A
SSEMBLI
NG THE FR
O
NT
SWIVELLI
NG
WH
EELS
In order to assemble the front wheels, force their axles in the ends of
the front legs, until you hear a characteristic “click” (Fig
.
9).
In order to
disassemble the wheels press down the button at the upper part of the
swivelling mechanism (Fig
. 10)
and slide the wheel axle in
.
The stroller has swivel wheels, which may be locked in a forward
facing position
.
In order for the wheels to swivel, twist the knob in the
upper part of the wheel mount in an anti-clockwise direction
.
To lock the
HANDLE
H
EIG
HT
ADJUSTM
ENT
It is possible to
adjus
t the pram handle heigh
t.
To perform the
adjus
tment, press down the round buttons on both sides of the handle at
the upper part, and then
adjus
t the right height (Fig
. 12).
PARKI
NG
BRAK
E
The pram is equipped with a rear parking brake
.
To engage the brake,
press its lever down (Fig
. 13). I
n order to disengage it, lift the lever
.
NOTE! Before starting to push the pram, make sure that the brake has
been disengaged
.
NOTE! Always engage the safety brake, when you leave the pram on
an inclined surface
.
NOTE! The brake is not designed for slowing down
.
It should be
engaged after the pram has been stopped completely
.
NOTE! The pram is not designed for running
.
ADJUSTI
N
G SUSPE
N
SIO
N
STIFF
N
ESS
EXTRA
S
H
OCK
AB
SO
R
PTIO
N
OF
THE BA
SSI
NET
AND
SE
AT
UNI
T
The baby carriage comes with extra shock absorption system for the
ride, turn the knob in the lower section of the shock absorber clockwise
.
element harness to secure the child
.
ADJUSTI
NG TH
E LEG
R
ES
T
The pram is equipped with an
adjus
table leg res
t.
To move it to the
right position, press down the buttons on its both sides (Fig
.
30,
31).
ADJUSTI
NG THE
BACKRES
T
zip serves to conceal excess material when the backrest is in a sitting
CANOP
Y
To attach the canopy, insert its tongues into the slots in armrests
The position of the canopy is
adjus
table
.
To
adju
st the position, pull the
The canopy has an additional section that can be pulled forward
.
To
38).
RA
I
N
FOIL
The pram is provided with a rain foil equipped with an air hole at
the baby’s face heigh
t.
To assemble it, put one end under the leg rest
or under the carrycot rear, and pull the other end onto the canopy
(Fig
.
39,
40).
The foil is suitable both for the deep and stroller version
.
MOSQUI
T
O
NET
The carrycot comes with a mosquito ne
t.
To put it in place, attach one
end to the inside of the canopy using zips and stretch the other end
over the rear of the carryco
t.
Attach the sides of the mosquito net to the
I
N
S
TA
LLI
NG THE
CAR SE
A
T WIT
H
ADAPTE
R
S
Push the adapters into catches situated on the stroller’s frame
The car seat has an
adjus
table handle
.
To position it, push the buttons
located at its feet
.
RE
MOVI
NG THE
CAR SE
AT
AND
ADAPTE
R
S
To remove the car seat, push both buttons located on its sides
To remove the adapters, push both buttons situated on their inner side
FOLDI
NG TH
E ST
R
OLLE
R
Before folding the stroller, remove the child seat or the carrycot
.
To fold the stroller frame, push the button on the upper part of
OPER
A
TION MANUAL
B
OTTLE
H
OLD
ER
To attach the bottle holder slide it down onto a special hook located
bottle in a vertical position
.
ATT
ACHI
NG
AND
RE
MOVI
NG THE
CAR
RY
CO
T
In order to attach the carrycot press it into the pram frame so that the
adapters on both sides of the carrycot lock onto the catches on the pram
ATTENTION! Make sure the carrycot is attached correctly prior to use
.
To remove the carrycot press the buttons on the adapters at the sides
RE
CLI
N
I
NG
CAR
RY
COT SUPPO
RT
The carrycot support is reclinable
.
To recline it into suitable position,
VE
N
TIL
ATE
D
CAR
RY
CO
T
The carrycot is ventilated
.
To open the vent holes, slide the air grate
CAR
RY
COT
CANOP
Y
AND
HANDLE
FO
R
CAR
R
YI
NG THE
CAR
RY
CO
T
The carrycot comes with a canopy
.
Its frame also doubles up as a
handle for carrying the seat (this is a handle for carrying the carrycot and
not the entire
pram).
ATTENTION! Before lifting the carrycot, position it upright
(perpendicular to the
ground)
whilst holding it by the handle
.
The canopy is
adjus
table
.
To position the canopy press the round
A
SSEMBLI
NG
AND
DIS
A
SSEMBLI
NG TH
E SE
AT
The seat should be assembled and disassembled the same way as
for the carrycot (see ATTACHING AND REMOVING THE CARRYCOT
The seat may be assembled with its front and back facing the
movement direction (Fig
.
24,
25).
NOTE! Before starting to use the pram make sure that the seat has
been assembled correctly
.
R
EST
RA
I
N
T SYSTEM
The seat is equipped with a 5-point restraint system (Fig
.
26).
It
should be used from the moment a baby starts to sit by itsel
f.
Unfasten
the belts, by releasing the forks from the central buckle, seat the baby,
without oppressing it, and then fasten the forks of all the belts to the
central buckle
.
The seat has an additional crotch strap which should be attached to
be a substitute for using the 5 point safety harness
.
NOTE! Always use the restraint system, if the baby can sit by itself
.
S
AFETY BAR
To attach the bar, insert its tongues into the slots in armrests
.
To
remove it, push the buttons located on the bottom of the slots
The bar is
adjus
table
.
You can detach one of its ends and move it
