Encoding Operation
6
.
Push the arm lift lever up to raise the arm, now platter will still running
but play will pause. To continue the play, user just need to put down the
lever.
7. Turn the Volume Knob for volume adjustment.
AUTO-STOP
Switch to OFF position: To cancel the auto-stop function. The turntable
tray won’t stop running after last song of record finished, and have to
switch the AUTOSTOP button back to ON position again to stop running.
Note:
the OFF status is used for some irregular records which when the
turntable tray stop but last song has not finished completely.
1. The user could record the records from PHONO to USB flash disk.
Bluetooth cannot be recorded.
2.Insert USB flash disk under the PHONO mode, choose the track you
want to record. Then long press MODE key about 3 seconds, the system
enters into ENCODE status.
3. Long press MODE key again to stop the record.
4. Switch the unit mode into USB status and re-insert the USB flash disk
again, you could playback the records on USB flash disk.
Note:
When USB memory is full, the record will not stop automatically.
To avoid the record missing, you may use the big memory USB disk.
Switch to ON position: Turntable tray will auto-stop running after last
song of record finished.
How to replace the stylus
To replace the needle, please refer to the instructions below.
Removing the needle form the cartridge
a. Place a screwdriver at the tip of the needle heads hell and push down
wards in the direction shown in sketch “A”
b. Remove the needle head shell by pulling it forwards and pushing
downwards.
Inserting the needle
