TV Function
TV Function
Basic Operation
1. Connect the TV RF source to the RF IN jack on the unit side panel.
2. Connect the power supply cord. If the player is in standby mode, set POWER switch to "ON
3. Press the AV/TV button to select the TV mode.
4. Press CH+/- buttons to select the channel or use the number buttons directly.
5. Press VOL+/- button to adjust volume
Parameters setup
TV Setup
1. Press MENU button. TV-MENU window appears .
2. Press VOL+/- button to select TV system fromPAL-N/PAL-M/NTSC.
NTSC TV System
11
TV Function
Parameters setup
Refer below table for detail.
NOTE
: While working with setup menu, press CH-/CH+ button to highlight a desired
item and press VOL-/+ to make adjustment. Press MENU button to exit setup
window.
PAL-M/PAL-N/TV System
12
ANTENNA
Select antenna type from Air or Cab
AUTO Search channel automatically
FINE
Select to tune picture
SKIP
Select from on/off to skip unwanted program
BRIGHTNESS Adjust LCD brightness
CONTRAST
Adjust LCD contrast
COLOR Adjust LCD color
HUE
Adjust LCD color
RESET Select to restore setting to the default.
ITEM
DISCRIPTION
5. SKIP
6. BRIGHTNESS
7. CONTRAST
8. COLOR
9. HUE
10. RESET
Press CH-/CH+ button
to show hidden items
TV-MENU
1. TV-SYS
2. ANTENNA
3. AUTO
4. FINE
MENU
NTSC
:QUIT
:SELE
:ENTER
5. SKIP
6. SWAP
7. BRIGHTNESS
8. CONTRAST
9. COLOR
10. HUE
11. RESET
Press CH-/CH+ button
to show hidden items
TV-MENU
1. TV-SYS
2. AUTO
3. MANUAL
4. FINE
MENU
PAL-M
:QUIT
:SELE
:ENTER
