- 18 -
Radio Function
Radio Function Operation
Press the AM or FM button on the remote control or the “SOURCE” button on the front
panel to enter the AM or FM radio mode. Press and hold the “/-“ button for
about 1.5 seconds on the remote control or front panel to start searching
forward/backward from the current frequency. Press the “/-“ button again to
stop searching. The radio frequency will be displayed on the display panel. The
frequency range of FM is from
87.5MHz to 108MHz; the frequency range of AM is from
520kHz to 1710kHz.
Tuning
Press the “/-“ button on the remote control or front panel once to tune the
frequency forward/backward in the radio mode.
Saving radio stations
If you like a radio station and want to store it for later listening, press the “SET” button to
save it. “SAVE X X” will be displayed on the display panel, where “X X” represents the
preset station number.
There are two methods to organize the saved stations:
_
Use the
/
buttons to adjust the station number, and press the “SET” button
again. The station will be saved with the selected preset station number.
_
Press the “SET” button again, the station will be automatically saved with the
currently displayed preset station number.
You can store radio stations from 0 to 19, total 20FM or 20AM radio stations. If no
buttons are pressed within 3 seconds of pressing the “SET” button the first time, the
frequency will appear on the display panel again, and the station will not be saved.
Accessing memorized radio stations
_
Use the number buttons on the remote control to input the preset number. Press the
“ENTER” button for confirmation to go to the selected radio station directly, or
simply wait a moment to go to the selected radio station.
_
Press the
/
buttons on the remote control or front panel to select the radio
stations forward and backward.
When selecting the stations, the “CH XX” will appear on the display panel, where “XX” is
the preset station number of the stored radio station. After a few seconds, the “CH XX”
disappears and the radio frequency will be displayed.
